304永利官网入口(中国)有限公司

8 Ports Multi Protocol LED Controller

ArtNet . sACN . KNX . UDP

32 Universes . DMX512/TTL Output
Record Madrix/MA2 . RDM . WEB . Audio . DMX Control . UDP/RS485 Control . Cloud Control . GPS . Firmware Upgrade . Muti-Sync . Dual RJ45

 

More Details Buy Now

ArtNet LED Controller

LNX-378 LED Controller

  Multi-Protocol advanced ArtNet LED Controller, support to record and playback the Madrix or DMX512 Console(MA2) using inside 16G SD card.

  Cooperate with any ArtNet or sACN host device such as MADRIX, Madmapper, MA2, LnxEffect, FREESTYLE, etc.

  Upto 8 isolated DMX512 or TTL ports, each port can be configured to 1-4 universe, maxium up to 32 universes in total. and DMX512 ports support RDM protocol.

  LNX-378 support KNXnet/IP protocol,use ETS5 to config and download,join the device to KNX bus system。device support ASCII command also, send command through UDP/RS485 to device to execute.

  LNX-378 has 3.5mm audio jack to detect the rhythm point of music and trigger to play SD file.

LNX-378 LED ArtNet304永利官网入口

LNX-378 Usage

  • Buildings, bridges, shopping malls and other outdoor lighting projects, KTV, Gym, Oxygen bar and other lighting and music fusion design, using MADRIX, LnxEffect, Madmapper software to create lighting effects, output DMX/TTL signal to drive the fixture, showing lighting effects.

  • KNX smart home and building integrated control,active the KNXnet/IP protocol in the WEB, use ETS5 to configure it, join the KNX control bus, dimming the light fixture through the group object of the KNX network or call the pre-recorded lighting effect file

  • Shelves, warehouse light instructions, industrial light instructions,use semantic lighting protocol, remote control lights through UDP or RS485 interface

  • KTV gymnasium, active music lighting synchronization, and quickly switch lighting effects, brightness, speed, etc. with the rhythm of the music

  • Record MADRIX or Consoles ArtNet data,use MADRIX to show online, and then record and play offline, saving the trouble of running MADRIX on a computer

  • Concerts and Exhibitions,use DMX512 console, DMX is connected to this device, and the lighting effects can be directly called and switched on the console

  • The lighting projcet of long-distance building or bridges,synchronized by GPS, and the lighting effects are played synchronously on the device in different geographical locations, and the lighting effects are unified.

  • Arrange different lighting effects on festival days and working days, create a play schedule, and play the specified lighting effect files according to the wanted time

  • Manage RDM fixture,search and manage to set each RDM fixture using RDM protocol directly

  • Large-scale lighting project (such as point light source application),connect multiple devices without limitation using network, sync to play at same time.

  • Input DMX and outputs ArtNet to Wysiywg, Magic 3D and other lighting simulation software

  • Need to transmit DMX long distance,the device can convert DMX signal into ArtNet network data, which can be transmitted to dozens of kilometers through optical fiber

  • Firmware can be upgraded through the network, and new functions can be pushed at any time.

LNX-378 Functions

  • Support ArtNet4 protocol with 32 domains,support any lighting control software or console with ArtNet function on the market, such as MADRIX, FreeStyler, MA2, Jinx, MadMapper, Pharos, PixelInvadors, DMXControl2/3, MagincQ. And support to record it.

  • Support sACN (E1.31) protocol,LNX-378 can switch to the these two different protocols to intercooprate with different console.

  • Support KNX (KNXnet/IP) protocol,the device supports KNXnet/IP protocol, can be connected to the KNX IP bus via Ethernet media, and import the device catalog via ETS5, configure it and download applications, and add the device to the KNX control bus network , Dimming the fixture or calling pre-recorded lighting effect files through the group objects of the KNX network.

  • 8 fixture drive ports, each port can be configured with 1-4 Universe, each universe has DMX512 channels, so the LNX-378 series controller can support up to 16384 DMX channels! Calculated according to RGB pixels, 5440 pixels points can be controlled at most! LNX-378 has two different interfaces: DMX512 and TTL. Please confirm when placing an order. (The controller with the suffix T is TTL interface, the controller with suffix D is DMX interface, and all DMX512 interfaces are magnetic isolation interfaces.)

  • SD card recording and playback,LNX-378 series LED controller can easily record Console or MADRIX and other ArtNet softwares data (full scene recording, including local and other devices data can be recorded), then offline playback.

  • Use PC for high-speed recording,In addition to using LNX-378 to record ArtNet online, you can also choose to use LINETXs LnxEffect software to record ArtNet data at high speed using the NIC on the computer, Upload the recorded file to the SD card of the LNX-378 device.

  • Editing, previewing, uploading and downloading of recording files,The LNX-378 can configure the device through the LnxManager software developed by LINETX Technology, and search all online devices on the network, which is convenient and fast to upload and download SD recording files through the network. Then you can use LINETX’s LnxEffect to preview and edit the recorded file, and define the frame in point and frame out point of the recorded file.

  • The device can be master and slave.,When the LNX-378 is in SD run mode, it can be used as the master device to drive other LED slave devices through the network; in addition, it can also be used as an ArtNet slave device to receive ArtNet/sACN data to drive fixture.

  • 200FPS high frame rate to playback,LNX-378 uses 16G high-speed Mini SD card, 1-200FPS wide frame rate playback speed is adjustable.

  • Support UDP and RS485 control interface,LNX-378 support UDP control interface, and R series support RS485 control interface. By sending a ASCII format control command to the device, the device will be remotely controlled.

  • Support the DMX control function using console, The E series LNX-378 supports the use of the DMX512 channel value sended by console to quickly switch the playback of the devices SD card file, adjust the playback speed, adjust the brightness and other parameters. This function is disabled by default, it can be enabled in the WEB.

  • Convert DMX to ArtNet,LNX-378 supports ArtNet server mode, which can convert DMX512 into ArtNet and send it out through the network. This mode can be used for 3D lighting simulation software such as WYSIWYG, Easy View 3D, LightingStudio, etc. In addition, fiber optic transceivers can also be used to transmit DMX512 signals over long distances through optical fibers.

  • Supports music rhythm and lighting synchronization,device has a 3.5MM audio interface and a built-in microphone(M series). All LNX-378 have music synchronization function. LNX-378 receive audio music signal in real time, analyze the rhythm points of the music, and trigger to switch SD files at rhythm points, or trigger to adjustment brightness and Speed etc.

  • Support RDM,The D series LNX-378 support RDM. All 8 ports of DMX512 support RDM (Remote Device Management) protocol. In the WEB, you can search for all fixture that support RDM and display them in a list, It is convenient to set parameters for each fixture.

  • Support RDM Over ArtNet,this advanced feature allows you using ArtNet to search and set RDM fixtures directly on the host side.

  • Support Gamma correction,The TTL interface of the LNX-378 supports Gamma correction algorithm. Gamma correction can be actived in the WEB to make the colors more realistic.

  • High-speed self-synchronization frame control,LNX-378 high-speed self-synchronization frame control algorithm can synchronous output to drive after receiving data from all ports in a frame. Effectively prevent the jaggedness and fragmentation of the view.

  • TTL supports custom chips timing,The TTL interface of LNX-378 has support to drive many chips, such as WS2811, WS2812, SM16703, TM1903, GS1903, etc., if there is no optional chip in the list, You can also customize the chip timing to support new chip.

  • Supports scheduled playback,In the WEB, one or more playback schedules can be created, and can specify which file to play on which day, day of the week, It can also be set to play automatically

  • Supports multi-device network synchronization playback, Numbers of LNX-378 can be set as the network synchronization play master device. When the one master to plays SD, it will notify all other master to play synchronously.

  • Support multi-device GPS synchronous playback.,The G series of LNX-378 supports Beidou satellite and GPS satellite. After time calibration by GPS satellite, all LNX-378 can be accurately synchronized to same time.

  • Intelligent idle blackfield, when LNX-378 detects that there is no ArtNet data, the idle blackfield will be actived, and each port automatically sends blackfield data.

  • Built-in switch with dual network ports,LNX-378 LED controller has two Ethernet ports, and each controller can be connected hand by hand

  • Support Projcet Lock,LNX-378 supports Projcet lock, After it actived. when the device exceeds the use time, it will be locked and the password must be provided to unlock it before it can continue to be used

  • Supports Firmware Upgrades.,The firmware of the device can be upgraded via the network on LnxManger, LINETX will continue to release the latest firmware, so that the function of the device will continue to keep to be the latest and best.

  • Free lighting software, commercial software like MADRIX is chargeable. If you don’t want to use this paid commercial software, you can use the LINETXs lighting effect software suite, which is powerful and easy to use. and it is free! Please visit /html/product/LnxLight_en.php for details.

  • English WEB interface,the LNX-378 has a very powerful WEB management system, and can be configured with English lauguage, WEB has an authentication to prevent illegal users to operating. In addition to being configured through the WEB, it can also be configed through the OLED screen and buttons on the device. The default IP address of LNX-378 is 192.168.1.21, the subnet mask is 255.255.255.0, and the default authentication password is: admin. The IP address and password can be changed in the WEB or through the HMI.

  • OLED screen and operate button,in addition to the WEB management interface, the LNX-378 also has a interface composed of buttons and an OLED screen. Through the menu-style configuration operation, it is convenient for you to quickly and directly configure the device.

Record ArtNet Controller

ArtNet Record and Playback

  High-speed recording of Art-Net lighting data

  Record the Art-Net data sink from uplink ethernet port and forward it to the downlink port

  The recorded file can be playback and controlled by DMX console or sync with Audio or schedule to play.

RDM . Easily Manage DMX Fixtures

  RDM (Remote Device Manage) is a fast way to manage fixtures. Through the RDM, quickly to discovery out the fixtures connected at DMX bus, and then set/get fixtures parameters.

  The discoveried fixtures is tabulated listed on the WEB page.

RDM Over Art-Net

  As an agent, LNX-378SD supports Art-Net software or master controller to remotely manage the RDM fixture be connected.

RDM DMX LED Controller
DMX Convert To ArtNet

DMX To ArtNet

  LNX-378SD has ArtNet Controller mode,when run in this mode,input DMX data and translate to ArtNet data to send out through ethernet, Generally there are the following two application scenarios:

Inputs DMX from console, converts and outputs ArtNet data to 3D lighting simulation software such as WYSIWYG, Easy View 3D, LightingStudio, etc. to simulate the operation of the lighting.

Where when Long-distance transmission of DMX512 is required, the traditional DMX transmission distance is limited. After being converted to ArtNet, use the optical fiber network to easily break through the distance of tens of kilometers and has strong anti-interference.

Sync the Rhythm of Music

  LNX-378SD can quickly analyze audio signals in real time, extract rhythm points in the music, and sync the lighting effects through rhythm points:

Rhythm point triggers to switch SD playback files

  The SD file can be a recorded ArtNet effect file, or an effect file generated by using LnxEffect software.

Rhythm point triggers accelerated playback

  When each rhythm is detected, quickly adjust and increase the playback frame rate to achieve synchronization.

Brightness follows audio intensity

LED Audio Control
DMX Control Function

DMX Control

  Use DMX console to control the LNX-378 with DMX channel value, including trigle to playback files, adjusting playback speed, and adjusting brightness.

  Support multiple LNX-378 devices connected to the DMX bus, each device can be configured with an addressx. (Each LNX-378 has 11 channels)

The audio and the DMX control mode of LNX-378 can be enabled at the same time, and the audio parameters can be quickly adjusted using DMX control interface, which is very suitable for KTV and Live lighting control.

Firmware Upgrade

   Upgrades the firmware of the LNX-378 through the network at LnxManager platform, keep the devices function to be newest

LINETX will continue to release the latest device firmware

   Download LINETXs LnxEffect software, open LnxManager, and right-click to upgrade the device firmware after searched the device.

LED Controller upgrade firmware
ArtNet LED Controller LNX-378SD

Easy Wiring

Dual Ethernet Ports

  LNX-378SD has two Ethernet ports, use CAT-5 cables to chained connect each controller, no external switch required.

Terminals

   Each wiring terminal of LED drive port has 3 screwed install holes and easy to wiring.

TTL Voltage Output

   TTL port has V-wiring terminal, which can directly connect to power supply of LED strip

Installation

  LNX-378SD has two mounting ear and 4 mounting screw holes, which is convenient to install at different place

304永利官网入口|304永利官网入口

XML 地图 | Sitemap 地图